Portable Rebar Cutting Machine Rebar Cutting Machine Cordless Rebar Cutting Tool Electric Rebar Cutter
Introduction:
The portable Rebar steel bar cutting machine is a steel cutting equipment, which is dedicated to cutting the short section, mainly for the processing of steel scrap before recycling, which is used for scrap steel recycling plant. The mini rebar cutting machine is made up of the motor, gearbox, reducer, steel bar discharge port, and the machine frame and other components. The portable steel bar cutting machine is driven by a motor and driven by a V-belt to rotate the reducer, and then the reducer is driven by a gearbox to continuously operate the cutter, so as to cut off the reinforcing steel.
Application :
It is suitable for common carbon steel, hot rolled round steel and rebar steel in all kinds of reinforced concrete in construction engineering. Flat steel, square steel and Angle steel can also be cut off.
Advantage :
1. Small volume with high strengthen steel structuure, light weight, compact machine body with reliable quality.
2. Rigid structure can make small function loss, good lubrication performance, gear end adopt the bearing make small resistance.
3. Bar cutting machine and other cutting equipment, compared with light weight, low engrgy consumption, reliable wore, efficiency higher characteristic.
4. Pure copper motor, 9 Crisi cutting blades, helical gear sheft for reducing noise.
5. Easy to move, front wheel steering, flexible mobility, easy maintenance.
| Certification: | RoHS, ISO 9001:2000, ISO 9001:2008, CE |
| Automation: | Automatic |
| Suitable for: | Carbon Steel, Stainless Steel |
Features:
1.Small volume, good quality, compact structure, compact and reliable.
2.Good lubrication performance: the box-type sealing structure is adopted and the gear splash lubrication, the continuous operation can be used for more than one month.
3.Easy to move: front wheel steering, flexible and easy to maintain.
| product name | Rebar Cutting Machine |
| Origin | Chongqing, China |
| Type | GQ40, GQ42, GQ45, GQ50 |
| Color | as shown |
| Voltage | 380V/customized |
| Applicable industries | energy and mining, machinery repair shops, manufacturing plants, construction engineering, building materials stores |
| Model | Motor power | Motor speed | Cutting diameter | Voltage | Cutting times | Color | Weight | Dimension
(mm) |
| round bar | rebar |
| GQ40 | 3KW | 1440r/min | 6-32mm | 6-28mm | 110V/
220V/
380V/
415V/
customized | 32/min | red/
blue/
green/
as your prefer | 365kgs | 1330x500x450 |
| GQ40-B | 6-40mm | 6-32mm | 390kgs | 1400x500x460 |
| GQ45 | 6-40mm | 6-32mm | 390kgs | 1400x460x500 |
| GQ50 | 6-50mm | 6-40mm | 480kgs | 1450x500x550 |
Precautions for use:
1. After starting, run dry first, check that all transmission parts and bearings are running normally, then work.
2. When the machine does not reach the normal speed, do not cut the material. When cutting materials, use the middle and lower parts of the cutter, hold the steel bar and align the cutting edge quickly and put it in quickly. The operator should stand on the side of the fixed blade and press the steel bar forcefully to prevent the end of the steel bar from popping out and hurting people. It is strictly forbidden to hold the steel bar on both sides of the blade with two hands and leaning over to feed the material.
3.It is not allowed to cut steel bars whose diameter and strength exceed those specified on the mechanical nameplate and red-hot steel bars. When cutting multiple steel bars at one time, the total cross-sectional area should be within the specified range.
4.. When cutting low-alloy steel, a high-hardness cutter should be replaced, and the cutting diameter should conform to the mechanical nameplate.
Q&A
Q1: - Can i request customize service?
A: Yes, dear sir, we can also customize voltage, material, colour, nameplate etc., and meet your other special request.
Q2: - What is the advantage of your factory?
A: Here we're your "Chinese Partner", accurate market sharing, reliable investment suggestion, select right machine, quick problem solver, reliable after-sales service, minimize purchasing risk.
Q3: - What service do you supply after order?
A: Your order will be fully tracked including production, professional quality control, strong logistics teamwork working and experienced customs documents preparation, you can get One-stop service from us.
Q4: - How to solve the after-sales problem?
A: You can send us a video or pictures to explain the problem, later we can give you a solution to solve it, if it is our responsibility, we will 100% in charge of it and try our best to make you satisfied, we pursue long term cooperation always.
Product Tags:
|
|
Portable Gq42 Rebar Cutting Machine Electric Images
|
